KingNeed GPS Speedometer Universal GPS Extend Digital Display 5.4 inch HUD Speedometer MPH/KMH with Over Speeding Alarm for All Vehicles Cars Bicycles

Price: $35.99
(as of Apr 01,2022 17:32:07 UTC – Details)

Product Description

KingNeed Innovation LLC is one of biggest GPS Tracker/ GPS HUD manufactors in the world with 25 years more history.

We are focus on technology innovation and unique design based on customers required and feedback from all of the world .

We are on the way to keep quality same as start.

Welcome to choose KingNeed products and share your story to us.

Humidity detect
✓
x
x
x
x
Speedometer
✓
✓
✓
✓
✓
Over-speed alarm
✓
✓
✓
✓
✓
Local time
✓
x
✓
✓
✓
Total Mileage
✓
x
✓
✓
✓
Single time & mileage
✓
✓
✓
✓
✓
KM&MPH switch
✓
✓
✓
✓
✓
Screen Size
5.9 inch
4.2 inch
4.5 inch
6.2 inch
9.5 inch
Single MPH Number number dimension
0.55 x 0.98 inch
0.63 x 0.94 inch
0.75 x 1.34 inch
1.06 x 2.05 inch
1.53 x 3.15 inch

Auto Brightness Adjustment

Keep your eyes on the road

KingNeed 5.4in Extend Digital GPS Speedometer HUD

Our 5.4 in extend display speedometer is specially designed for drivers, easy to use, just connect the device to the USB cable, plug it into the car USB port.

I. KingNeed 5.4in Extend Digital GPS Speedometer Main Features:

Head-up display the driving speed by GPS signal.
5.4in Full screen display, large font size. Green color speed display, easy on your eye.
Driving time and mileage calculation and display
Easy Setup–Plug & Play- Power through vehicle cigarette lighter.
Compatible with all Cars & Trucks. Use GPS signal guided calculation.
Display MPH or KM/h
Auto adjust brightness through light sensor
Over-speed Alarm setting. (Set to 888km/ml if you no need Speed Alarm）
Total mileage display after car stops.
Vehicle Clock-Time display/ Altitude display.

KingNeed 5.4in Extend Digital GPS Speedometer Spec. map:

III. Technical Parameters:

1) GPS location time: 1 to 5 minutes outdoor (Location time is based on GPS signal well, please keep speedometer in good GPS signal condition).

Notes:There is no GPS signals indoors.

2) Speed deviation: Since the speed data comes from the GPS satellite, slight deviation is unavoidable.

3) Input voltage: DC 5V Input current: DC 50-120mA. Power bank for power supply is supported.

4) Working temperature: -30 to 70 degree.

5) Driving data deviation is around 2%.

6) All driving data will be cleared when power off except the total mileage.

7) The GPS Speedometer did not completely waterproof, do not used for ATV directly.

II. Product More Details:

1) Set over-speed alarm rate

Press Enter button once, show 001
Adjust the alarm speed rate with the toggle switch
The default alarm speed rate is 120 km /H.
A three times “Beep” sound alarm will be triggerd when over speed occurs. No more alarm will be triggered when over-speed is detected continuously.

2) Driving speed calibration

Press Enter button twice, show 002
Adjust the speed rate with toggle switch, default rate is 005, the range is -20 to 20. if you want to
increase the display speed by 1KM/H, adjust rate to 006, if you want to decrease it by 1KM/H, adjust
rate to 004,and so on.

3) Altitude value calibration:

Press Enter button three times, show 003
Adjust the Altitude rate with toggle switch. The default rate is 850. Each time you slide the toggle switch, the altitude
will be increased by 5 meters or decreased by 5 meters. The setting range of calibration value is 750-950.

4) Timezone calibration

Press Enter button four times, show 004
Adjust the time zone rate with toggle switch.
The setting range of calibration value is -90 to 90 minutes.

5) Set the speed meter unit (KM or Mile):

Long press the “Enter” button, when the left side of the screen lights up “ML” means the speed is displayed in miles.
Long press the “Enter” button, when the left side of the screen lights up, “KM” means the speed is displayed in kilometers.

6) Screen display Settings

Slide the toggle switch up and hold to see the driving speed only, repeat to see full information display.
Slide the toggle switch down and hold to see time display at the bottom right corner, repeat to see altitude display.

7) Factory defaults:

Press Enter button 5 times, Slide toggle switch down once when displaying 005 to restore the factory defaults and clear
the total mileage.

8) Fatigue Driving Alarm

In every hour, system will trigger a fatigue driving alarm with continuous driving time displayed, in order to remind driver
to avoid drowsy-driving.
Example: 001 means one-hour continuous driving, 002 means two-hour continuous driving and so on.

【5.4 inch EXTEND DISPLAY】 Extend Display make more easily and comfortable to read. Speed in KM/H or MPH, Mileage. Long press the Enter Button to choose speed unit you want. It can be charged 5V output voltage USB cable.
【OVER SPEED ALARM】 Press “Enter” button once, show 001. Adjust the alarm speed rate with the toggle switch. Once over speed, it will give a warning alarm. If no need the over speed warning, just adjust the over-speed to any higher value.
【ROTATABLE HOLDER】 You can adjust it to your desired angle with the rotatable holder. Strong sticker under the holder can fix the holder on the car console steadily. So easy to use and make your driving safely.
【24 MONTH WARRANTY】 Any questions, please contact to us by email, we are happy to support with professional service in time to make you have a satisfactory shopping experience.